Arcolite Plus Block Jointing Mortar / Adhesive
Arcolite® Plus Block Jointing Mortar is a superior water resistant cement based mortar joint especially formulated for joining Arcolite® AAC Blocks etc. It contains fly ash, selected graded dry sand, grey cement and imported & modified polymers that make the joints stronger and smoother.
Its Superbond Technology further improves workability, water retention, durability and strong adhesions to surfaces. It is also more resistant to corrosive environment than traditional jointing mortars.
Arcolite ® Plus Block Jointing Mortar by virtue of its Superbond Technology ensures in laying a strong and thin layer of joint. It is not only cost–effective, but also makes the walls even by improving the levelling of the walls and reducing the thickness of the plaster.
- Stronger Adhesion
- No Water Percolation
- Consistent in Quality
- No Curing Required
- Superbond Technology
- Laying & Joining of Arcolite AAC Blocks
- Joining of Concrete Windows and Door Frames etc.
Block Jointing Mortar Technical Specifications
| Parameters | Test Method | Specification |
|---|---|---|
| Appearance | Visual | Free Flowing Powder |
| Colour | Visual | Greyare |
| Open Time | EN 1346 | 10-15 Min |
| Mixing Ratio | By Volume | 3:1 (Powder to Water) |
| Pot Life | In- House | >90 Min @ 27 deg C |
| Self Curing | - | Yes, No water curing is required |
| Hard Dry | - | 24 Hrs |
| Tensile Adhesion (28 Days) | DIN EN 1015-12 | >0.5 N/mm2 |
| Compressive Strength (28 Days) | DIN EN 1015-11 | >12 Mpa |
Get a Quotation
“Seeking a quote? We’re here to provide you with competitive pricing and exceptional service.”
Block Jointing Mortar Technical Specifications
| Parameters | Test Method | Specification |
|---|---|---|
| Appearance | Visual | Free Flowing Powder |
| Colour | Visual | Greyare |
| Open Time | EN 1346 | 10-15 Min |
| Mixing Ratio | By Volume | 3:1 (Powder to Water) |
| Pot Life | In- House | >90 Min @ 27 deg C |
| Self Curing | - | Yes, No water curing is required |
| Hard Dry | - | 24 Hrs |
| Tensile Adhesion (28 Days) | DIN EN 1015-12 | >0.5 N/mm2 |
| Compressive Strength (28 Days) | DIN EN 1015-11 | >12 Mpa |
Block Jointing Mortar Technical Specifications
| Parameters | Test Method | Specification |
|---|---|---|
| Appearance | Visual | Free Flowing Powder |
| Colour | Visual | Greyare |
| Open Time | EN 1346 | 10-15 Min |
| Mixing Ratio | By Volume | 3:1 (Powder to Water) |
| Pot Life | In- House | >90 Min @ 27 deg C |
| Self Curing | - | Yes, No water curing is required |
| Hard Dry | - | 24 Hrs |
| Tensile Adhesion (28 Days) | DIN EN 1015-12 | >0.5 N/mm2 |
| Compressive Strength (28 Days) | DIN EN 1015-11 | >12 Mpa |